Skip to content
Schedule a demo
Schedule a demo

EZ-GO · Connected worker platform

One way of working,
on every line, shift and site.

The EZ-GO platform gives every operator exactly the right instruction at the right moment: what to do, where, when, and how.

Start the free scan Calculate your savings

The same frustrations, every single day?

Do you recognize this on your floor?

Scanning after the shift

Paper checklists that still need to be scanned at the end of the shift.

Instructions nobody reads

A ten-page work instruction nobody reads.

Lines standing still

A line that stands still too long after every changeover.

Reports without follow-up

An operator who has reported the same issue three times and never hears back, and so stops reporting it.

You lose production capacity without noticing, simply because you have no control over your standards.

What is at stake

When it goes wrong, the impact is often big

Standards that are not followed affect your organization more than a dashboard turning red.

Across borders

A recall that spreads across dozens of countries.

On the floor

An incident in which someone is injured or killed.

Out the door

Thirty years of expertise that disappears the moment an experienced operator retires.

What customers achieve with it

25%

less unplanned downtime

20%

waste reduction

40%

shorter onboarding time for new operators

EZ-GO

Smart software, shaped by years of experience on the floor

The EZ-GO platform was built for and by operators, on one conviction: put the power in the operator's hands. It is a continuous improvement platform for the shop floor, where one way of working is followed everywhere.

You start small and expand:

  1. Start with one line or department

    Implementing EZ-GO is not a months-long IT project. The IT department manages the devices, and no more time investment is required.

  2. Digitize the shop floor

    Checklists, tasks, audits and work instructions, all in one digital platform.

  3. Roll it out easily

    Across the entire factory, and then across all your sites.

In the app

Everything the shift needs, on one tablet

EZ-GO checklist on an iPad
Digital and paperless

Checklists

The operator works through the list at the workstation. Every point gets a thumbs up or down, with a photo where that helps.

Walk through a checklist
EZ-GO task overview on an iPad
Plan, do, log

Tasks

Everyone on the shift sees what is due, what is done and what is still open, per line and per station.

See a shift planned
EZ-GO safety audit on an iPad
Safety, quality and hygiene

Audits

Walk the round on the tablet. Findings, photos and follow-up stay together from the first question on.

Walk an audit round
EZ-GO actions on an iPad
From signal to solution

Actions

Whoever spots a problem reports it on the spot, with a photo, and it goes straight to the person who can fix it.

See how a report gets picked up
EZ-GO reporting on an iPad
Insight per shift

Reporting

Checks, tasks and audits come back as one picture, per line, per area and per department.

See a shift in one view
EZ-GO work instruction on an iPad
The way of working, per machine

Work Instructions

The right step at the right machine, with photo and video, so the work goes the same way on every shift.

Open an instruction
EZ-GO skills management on an iPad
Train and certify skills

Skills Management

See who is signed off for which task, and what still needs training before someone starts.

See who is qualified
EZ-GO feed on an iPad
Company news and team updates

EZ Feed

What is going on in the plant lands on the same screen the shift already works on.

See what happens on the floor

Built for your role

From the boardroom to the operator at the line: everyone looks at the shop floor with a different question.

Choose a department

Operations Director

One way of working across every plant, with one dashboard to see where standards are followed and where they are not. No more recalls because a gap slipped through unnoticed.

Plant Manager

Start with a pilot on one line, prove the value, and scale up across your site. Grip on knowledge that stays, even when experienced people leave.

Managing Director

One way of working you can roll out as the company grows, and proof that it is actually followed. Knowledge stays in the business instead of walking out with the people who built it.

Continuous Improvement Manager

Every check, deviation and action in one place, so improvement runs on what happened instead of on what people remember. Operators propose the improvement themselves and the new standard is live in minutes.

Operational Excellence Manager

Standards written once and followed everywhere, with the data to see where they hold and where they slip. TPM, 5S and autonomous maintenance land in the same platform instead of in separate binders.

Production Manager

Better insight into result, FTE, and waste, the numbers that make or break the PnL. EZ-GO helps prevent the costs you otherwise have to explain.

Operator

One screen with everything the shift needs: checks, instructions, and tasks. Solve problems yourself, take ownership of the line, and hand over a clean shift every time.

Teamlead / Shift Manager

See at a glance who followed the standard and who did not. Overview of skills for onboarding and daily planning, so you spend less time chasing and more time leading.

Maintenance Technician

First-line tasks sit with the operators, so you get to the structural work. A report arrives with a photo and a clear description instead of a shout across the hall.

Superuser

Build and change the content yourself: checklists, tasks and instructions with photo and video. A new machine or a changed procedure is in the app the same day.

Process Technologist

See what happened during the night shift in photos and video instead of in a note. Trace back what was measured during a run and adjust the process on facts.

QA Manager

Audit-ready in a few clicks instead of three weeks of preparation. Photo evidence per check and a full history you can show during a BRC, IFS, or customer audit.

HR

Onboard new people with visual work instructions and a skills matrix that shows who is qualified for what. Shorter onboarding time, less dependency on experienced colleagues.

IT / Digital Transformation

No months-long implementation: IT manages the devices and optionally whitelists, and that is it. ISO 27001 and SOC type 2 certified. Connects with Active Directory, and integrates with your QMS, LMS, SAP PM, Ultimo, and Power BI.

Maintenance Manager

Autonomous maintenance that actually gets done and logged, so you see a breakdown coming instead of hearing about it. Machines stay in the condition to make good product.

HSE Manager

Safety rounds, incidents and toolbox items in one place, with follow-up you can track. Critical steps are locked into the checklist, so they are done and not assumed.

Supply Chain Manager

The same standard checks at goods receipt and in the warehouse as on the line. A stock count goes straight into a checklist, so nobody has to decipher handwriting.

Four core values, one platform

Safety, quality, efficiency, and training all come from the same thing: one way of working, followed everywhere. Here is what that delivers, starting with what matters most.

Operator checking safety at the line

Safety

Every critical safety step done, or just assumed?

From assuming to proving, on every shift and every site.

Critical steps are locked into every checklist and audit, with photo evidence and automatic follow-up. Nothing gets skipped, and you can show it. The same standardization also delivers your quality, your efficiency, and your onboarding time.

Quality

Catching quality issues too late?

Catch it within the half hour, on the line itself.

Operators run the same quality checks at the same moments, with a photo as proof. Because everyone follows one standard, the deviation surfaces early, not after a customer complaint.

Efficiency

Losing production time, but where?

Less unnecessary downtime at start-up and changeover, and fewer recurring breakdowns.

The same steps, in the same order, on the tablet, for start-up, changeover, and first-line maintenance. Standardizing removes the gap between your best and worst shift.

Training

Know-how walking out the door?

New people are ready to work in days, not months.

Your experienced operators capture the standard once, in visual instructions with photo and video. New people follow the same way of working from day one, even if they do not yet speak the working language fluently.

Multi-site

One standard across all your factories

Your problem is not one line. It is that every factory does it just a little differently. With the EZ-GO platform you set one standard and roll it out plug-and-play across all your sites, see at a glance where it is followed, and move a best practice from one location to another.

You start at one site, prove the value, and scale up with what works.

Request the business case

Q&A

The questions you are asking, answered in advance

What does it cost, and what does it deliver?

Costs and returns differ from one situation to the next. Together with our experts, we identify your organization's needs, and based on that we put together a suitable business case and price.

Why EZ-GO and not another platform?

Because EZ-GO was developed from the mindset of the shop floor, not from an IT mindset. That is exactly what increases adoption among operators, and that adoption ultimately determines success.

Does EZ-GO run reliably, and does it connect with what we already have?

Yes. Integrations are possible with SAP PM, Ultimo, ATOSS, and Power BI, among others.

How quickly can I start?

You begin with a pilot of about two months on one line or department. An evaluation follows, and then you roll EZ-GO out across the entire factory or to other locations. The IT department supports managing the devices.

Customer stories

What they say on the floor

“EZ-GO delivered more than we expected.”

IR Isabelle Rozema Manager Continuous Improvement

“This makes our processes future-proof and scalable.”

SW Sandor van Weegberg Training & Education Manager Benelux

“The EZ-GO app is the enabler of improvement. All I can say is: go, go, go!”

JK Jacqueline Kerstma CI Manager Wolvega

“The system has to work for us, not the other way around.”

RB Roel Barelds Manager Production

“All operators are happy with it.”

AW Agnieszka Wojcik Packaging operator

“Given how much it has benefitted us, I would recommend it to anyone.”

FW Franklin Weenink Operations Director

“The data is used to improve the process.”

DD Diala Daoud QHSE Manager

“Perhaps the most important thing is that we now have a tool with which we guarantee that all process steps are always carried out in the same way and at the right times.”

DV Dick de Vries Quality Manager

“Together, we define the optimal working method.”

RV Romano Vonkert Teamlead

“Work instructions with photos and videos are clear, unambiguous and great for training new staff.”

WR Wim Rutten Floor Manager

“You think: I know how to do it, until you forget something once.”

JA Joep den Adel Team Leader

“EZ-GO has the power of simplicity.”

YW Yorick van der Wal Superuser EZ-GO

“Every morning the EZ-GO data is on the agenda, especially the red thumbs.”

RG Ruben Golstein Team Leader

“Our students are the early adopters of EZ-GO, making them especially valuable to the food and process industries.”

MK Marc Konings Training Manager

“EZ-GO is easier, more transparent and more fun to work with, and it improves productivity.”

MK Michael van Keulen Operator

“Everyone knows what is expected of them, and there is less discussion.”

GW Gerald Willemsen Bakery manager

“Everyone can create content in EZ-GO.”

PR Pia Ingles Rodriguez Continuous Improvement Specialist

“I believe in autonomous maintenance by the operator. But this is something you have to facilitate. This platform provides the opportunities for it.”

DR Detmar Roessink Managing Director

“EZ-GO keeps the machinery in optimal condition and prevents errors and downtime as much as possible.”

DV Dick de Vries Quality Manager

“Students tell me they really enjoy working with it, and we see their motivation and self-confidence grow.”

TK Ton Kitzen Volunteer
See all customer stories

In plain terms: what is EZ-GO?

EZ-GO is a continuous improvement platform for the factory floor. It consists of the EZ-GO app that operators use at the line, and a CMS in which key users build checklists, tasks, audits, and work instructions, among other things.

In EZ-GO
  • Checklists, changeover and value registrations
  • Firstline maintenance tasks and follow-up
  • Audits and inspections
  • Actions and report suggestions for improvement immediately
  • Training using visual work instructions; insight into assessments and the skills of operators and teams
  • Data and integrations options
Not
  • A QMS
  • A MES or ERP
  • A months-long IT project
  • Software that does not support the operator

Curious what this looks like on your line?

Tell us what a shift on your floor looks like. We will tell you where EZ-GO fits, and where it does not.

Ask your question

Business case

Request the business case

We help you draw up a business case that clearly maps out the financial benefits. Leave your details and we will contact you.

We use your details to contact you about your business case. Read our privacy policy.